Teach you to skillfully remove tape traces on ceramic tiles

Teaching you to skillfully remove tape traces on ceramic tiles

Teaching you to skillfully remove tape traces on ceramic tiles

1. Apply toothpaste evenly on the surface of the tiles tape and wipe it off with a soft rag after 5 minutes. For ceramic tiles with more tape traces, you can apply toothpaste twice to remove them. The principle is that toothpaste contains glycerin, which is a good solvating agent and can dissolve the ingredients of self-adhesive. Many MM cosmetics also contain essential oils, and can also be used to remove traces of tiles and tape.

2. First tear off the self-adhesive decorations attached to the surface of the tiles, soak the towel with warm water, and wipe them twice repeatedly; then use a warm and wet towel to apply soap and wipe them repeatedly on the traces; finally use a clean warm and wet towel to wipe the soap foam, and the self-adhesive traces will be removed

3. Then: scrape with a pen and paper knife, suitable for hard bottoms such as glass, floor tiles, etc.; wipe with alcohol, suitable for glass, floor tiles, clothes, etc.; freeze, the self-adhesive glue becomes hard after freezing, and can be tear off directly, suitable for methods such as alcohol and scratching.

4. The effect of fume oil essence is also OK. If it is self-adhesive stickers, you can also use a hair dryer to blow it out and remove it if it is heated. However, it is not suitable for plastics, as overheating plastics will deform.

5. Use a blower to blow hot, which is very effective. It is convenient for everyone to basically have a blower and blow dryer at home. Whether it is stickers, glass, plastic, wood, or metal, you can use the blower to blow back and forth a few times, then tear apart a small side, and slowly tear it along the direction of tearing, and the effect is very good.

6. Just buy a bottle of self-adhesive remover, which is convenient and easy to use!