The water pressure of tap water is generally relatively stable, and the water tank is filled with water. Test the drainage effect of the toilet and whether the flushing is effective. If the water vortex is very fast and it rushes very quickly, it me...
The water pressure of tap water is generally relatively stable, and the water tank is filled with water. Test the drainage effect of the toilet and whether the flushing is effective. If the water vortex is very fast and it rushes very quickly, it means that the water is unobstructed. How to install the
toilet? How to replace the toilet lid?
Toilet installation key methods.
1. Check the level of the floor where the toilet is about to be installed. If it is found to be tilted, it can only be installed after adjusting to level;
2. Before installation, check the sewage pipe of the toilet to clearly understand the sewage pipes, sand, waste paper and other debris in the sewage pipes;
3. The sewage outlet retains a height of 2-5 mm above the ground;
4. After debugging and installing the water tank accessories, connect the tap water, fill it into the water tank, and then observe for a few minutes whether there is water leakage in the water tank or water inlet hose;
5. The water pressure of the tap water is generally relatively stable, and after the water tank is filled with water. Test the drainage effect of the toilet and whether the flushing is effective. If the water flow vortex is very fast and it rushes very quickly, it means that the water is unobstructed. Otherwise, check whether there is any blockage.
Toilet installation
1. Installation points 1 and 2 above;
2. Fixing toilet (select one of the fixing methods according to the fixing method of the toilet)
Method 1: Blowing bolt fixing method, this method is a toilet designed for a toilet with a mounting hole at the bottom. Place the toilet in the installation position, use a pencil to draw the position where the hole needs to be opened and the bottom gallery on the ground according to the position of the installation hole, then remove the toilet, open the hole at the marked position and insert the explosion bolt, apply adhesive at the junction of the toilet discharge outlet and the ground sewage outlet, place the toilet smoothly, firmly pull the bolts, and finally seal the bottom foot of the toilet with cement mortar.
Method 2: Cement bonding method, this method is for toilets designed with no installation holes at the bottom. Place the toilet in the installation position, use a pencil to draw the bottom gallery at the toilet, lay a circle of 30mm wide and 15mm high cement mortar inward along the outline, apply adhesive at the junction of the toilet discharge outlet and the ground sewage outlet, clean the bottom of the toilet, and place it smoothly in the installation position to make it firmly bonded and wipe off the overflowing cement mortar.
3. After the toilet is fixed, wipe the excess cement adhered to the toilet and the ground immediately;
4. Connect the toilet water tank and the tap water pipe;
5. Check whether the water tank is leaking, and then flush to check whether the sewage pipe is unobstructed;
6. It cannot be used for three days after installation. At the current cement solidification rate, it will take at least one day to not affect its stability.
Toilet cover replacement
Method 1: When changing the toilet cover, we need to remove the fixing bolts behind the toilet to replace it; it can be operated in the opposite direction during installation. Generally, toilet covers have no size difference, just adjust the two bolts during installation. However, you also need to measure the size, the distance of the screw hole, the width and length of the toilet cover, and then purchase a new toilet cover to replace it!
Method 2: Turn around the toilet, see where the screw cap of the toilet cover is, then choose a suitable wrench, and just take off the screw cap. The positions of the screw cap of the toilet cover are divided into two types: light and dark places. It is easy to find the screw cap in the dark, but the screw cap in the dark is not easy to see. The general position is set at the edge of the toilet tank, so open the cover, put your hand in, and touch if there is a screw cap in the direction of the water tank. To install the toilet cover, you actually need to remove the fixing bolts behind the toilet, remove the previous toilet cover, and then replace the new toilet cover with the fixing screw cap. Currently, most toilet covers are not of different sizes, just install the screw bolts at both ends of the toilet. However, you must measure the size of the toilet before changing the toilet cover. The width and length of the screw cap from the toilet cover also need to be determined. To avoid buying unsuitable products.
Method 3: Different styles of toilet covers are installed differently. Generally speaking, the bottom of the toilet cover is connected to the toilet, and the back is screwed with screws. Just stretch your hand and find the screws on both sides to unscrew the entire cover. It is very simple, you can try it.
Method 4: You can find a professional to replace it for you. So how much does it cost to change a toilet lid? If you are looking for a professional team, then the price cannot be determined, because there will be differences in charges for each place and everyone, and the editor cannot give you an exact data. Some workers who change toilet seats offer free replacements, but to use the products they provide, the slightly more expensive price already includes their labor costs.
The function of toilet lid
For toilets, toilet lids still have many functions:
1. Health protection: When the toilet is flushed, many bacteria can fly up due to the water pressure. Due to people's habits, they generally have to lower their heads and flush them. That is to say, bacteria will come to you with enthusiasm with thousands of 10,000 yuan……
2. Caring for small animals: Urban life, many people like to raise all kinds of cute small animals. With toilet lids, pets will prevent them from drinking water in the toilet or even drowning.
3. Use as a small stool: by chance, you can cover it and sit as a stool. You know which situation you can do.
4. Reduce odor: When flushing, cover the lid to effectively reduce odor.
5. Reduce the sound of flushing: When hospitality, or other inconvenient situations, covering the toilet seat can effectively reduce the sound of flushing.
6. Regarding the use place, it helps to express humanized services and improve the overall image of the service place. .
7. One toilet for one person, “ private bathroom ” users feel relieved.
8. Avoid squatting and stepping on the toilet and extend the service life of the toilet.
9. Effectively avoid conflicts caused by accidents caused by squatting and stomping on the cover..
10. Reduce sanitary paper and cleaning water, save energy and money.
11. Effectively avoid interspersed infection: Because the cleaning cover on the toilet pad is changed one by one, it can completely prevent the mutual infection of infectious diseases between Ma Yong users.
12. It is conducive to promoting the progress of the establishment of physical and material culture in China's urban areas, and will promote the development of the health level of all mankind.
