Everyone who is here to live knows that the monthly fee is a lot of money, especially in summer, the air is turned on every day, and the fee is even more exciting. In fact, many appliances in the home can save electricity as long as they are used pr...
Everyone who is here to live knows that the monthly fee is a lot of money, especially in summer, the air is turned on every day, and the fee is even more exciting.
In fact, many appliances in the home can save electricity as long as they are used properly! This is a guide to save money and save money for you!
1. According to the family members, it is recommended that you determine the power of the electric cylinder based on the number of family members. The smaller the power, the more power is, the less power is.
2. Soak the rice before cooking
soak the rice for 30 minutes before cooking, which can shorten the cooking time of the electric pot. The excess heat effect after the electric power is cut off should be used to heat up the vegetables and food.
3. Unplug the power plug
in time and the power standby power is 2.5w. After the power supply is used, you must also turn off the power supply by hand. If it is not turned off, the power supply will enter the temperature maintenance state and continue to consume power. It consumes electricity and shortens life.
4. Wiping the
electric hose regularly to increase dirt or too much steam will cause its thermal performance to become worse. At this time, the food should be cooked and the energy consumed will naturally increase.
1. For a refrigerator, the temperature around the refrigerator increases by 5 degrees, the power consumption inside it must be increased by 25%. Therefore, the refrigerator should be away from the heat source.
2. Choose the appropriate temperature
to adjust the refrigerator to 5 degrees Celsius, and the cold storage room to 14 degrees Celsius at sub-minus. It is more energy-saving and is also conducive to food storage.
3. Food storage is 80%
There are too little food in the refrigerator, and the heat capacity will become smaller and the power consumption will be increased. Too much food is not conducive to the cold air circulation, and it also consumes electricity. The food storage capacity in the refrigerator is 80%.
4. Unplug in the refrigerator
If the food in the refrigerator needs to be unplug, you can put the food in the refrigerator several hours in advance. The cooling of the food can reduce the flow of the refrigerator's compressor, and the relative temperature difference in the refrigerator can also unplug the food.
5. Regular defrosting
frosting is a bad conductor of cold. The refrigerator's cold capacity decreases. Regular defrosting of the refrigerator can reduce consumption and save electricity.
1. The water temperature and environmental temperature are higher in summer. You can heat it 1 to 3 hours in advance when using it, and the water temperature is set at 40 to 60 degrees Celsius. In winter, the water temperature and environmental temperature are relatively low, so you can heat it 3 to 5 hours in advance.
2. Unplug the power when not in use
In addition to choosing a dielectric water heater, it is best to unplug the power supply of the water heater when the water heater is not in use. If you need to use it, turn it on in advance to avoid being in a warm condition for a long time.
1. Unplug the power plug without time
Now TVs are basically LCD TVs, most of which do not have mechanical switches, only remote switches, and generally the standby power is 0.3~5 watts, so it is best to unplug the power plug and outdoor antenna after shutting down the machine, which is both energy-efficient and safe.
2. Control the contrast and brightness
The power of LCD TVs is mainly in the backlight light. Most LCD TVs have automatic brightness control function, which automatically adjusts the brightness of the backlight according to the external ring. It is recommended to turn on this function when viewing the TV. Generally, the power will be 20% to 30%, and the maximum power will be about 40%.
Cold energy saving strategy1.26℃ cool and free of charge
Theory, the cooling temperature can be increased by about 10% of the electricity. However, considering comfort and health factors, the cooling number should be set at around 26℃, which is both cool and free of charge.
2. Frequently turning on the cooling air will keep it in the operating state, making it more expensive. Therefore, when the indoor temperature decreases, do not rush to turn off the cooling air, and adjust the temperature and the wind volume is small.
3. The cooling time from starting to feeling refreshed is the most energy-consuming; and when the room temperature is the same as the set temperature, the electricity consumption will decrease. The automatic mode will select the most appropriate wind and direction according to the room condition.
Washing machine power-saving guide1. Soak first and then wash
Before washing, soak the clothes in laundry detergent or washing powder solution for 10 to 14 minutes to allow the washing agent to work with the dirt on the clothes, and then wash them. In this way, the laundry machine's transportation time can be reduced by about half, and the power consumption will be reduced by half.
2. Clothes of different colors are washed separately, not only clean, but also quickly, which can be reduced by 1/3 of the time compared to washing together.
3. Pay attention to the fact that the amount of water is used
Too much water is affected by the normal washing function of the washing machine. Note that the water level should not be too high.
With these power-saving tips, the money saved is a considerable amount. Friends, please use it~
Source
